12V Auto Door Lock Actuator/Solenoid


12V Auto Door Lock Actuator/Solenoid
Images/31198-large.jpg Images/31198-1.jpg   California Proposition 65 Warning
Stock Number: 31198 SL
 Review Average:  
 Number of Reviews: 1
 View Reviews | Review this item
$5.95


This item is NO LONGER available. Please use our SEARCH feature and see if you can find an alternate item for what you were looking for.
This item is no longer available


SHARE
    
     Email this to a friend     

Detailed Description

Automotive lock actuator. 12VDC/4.4A power, reversing polarity reverses stroke. Intermittent duty. 3/4in. approx. overall stroke. 7in. leads with male bullet terminals.
L: 6-1/2" O/A W: 2-3/8” T: 1-1/8” WT: .4

California Proposition 65 Warning WARNING: This product can expose you to chemicals including Nickel which is known to the State of California to cause cancer and which is known to the State of California to cause birth defects and/or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Click to see Why is this here? As of August 2018 the State of California has changed the requirements of the “Prop 65” law. We now must list on our website any possible chemicals the can cause cancer, birth defects or reproductive problem.

As an example:
   ABS plastic contains styrene
   PVC wire insulation can contain Di(2-ethylhexyl)phthalate (DEHP)
   electrolytic capacitors can contain Ethylene glycol
   Brass can contain Lead
   flame retardant pc boards can contain Tetrabromobisphenol A (TBBPA)
   Aluminum alloys can contain Chromium

To put it simply we are a small company and do not have the resources to test every single part, so we list every thing as hazardous. Please recycle all electronic parts responsibly and under no circumstance eat, drink or smoke these parts and wash your hands after touching!


 Product ReviewsClick here to review this item
Great buy
Anyone with a little mechanical ability should be able to handle installation of this product. You can use the internet to find out how to remove the door panels on your particular vehicle, which can be more complicated than installing the new door locks. Position the door lock against the door where it will reach the wiring and have a strait pull/push of the door lock rod. You can use the brackets included over any opening that interfers with your positioning. Once positioned mark pilot holes and drill, do this on the outside of panel towards you to aid in percision placement of pilot holes. Now you can position the lock mechanism inside the door cavity and install with screws. Your original locks may have four wires only cut the two wires that supply 12 volts of power when the door lock switch is pressed up or down, the other two are left as they are sometimes connected to the door ajar indicator light. You can install the lock anywhere that it will connect to the rod that you use to lock and unlock the door manually. Mine work great!!!!!!!